 |
|
| Processing Guide: | PVC-P - Polyvinylchloride plasticised |
|
|
| Extruder: | Single screw with vacuum, grooved feeding section |
|
|
| Screw Design: |
1) Two stage screw: 3:1 compression in feed zone (before vent) decompression at the vent 3:1 compression (with at least 3-4 flights at the end of the screw as a metering zone) 2) Barrier Screw |
|
|
| Compression Ratio: | 2,5-3,0:1 |
|
|
| Cylinder Temperatures: |
140-190 C 284-374 F |
|
|
| Melt Temperature: |
170-200 C 338-392 F |
|
|
| Pre-Drying: | no |
|
|
| Calibration: | |
|
|
| Miscellaneous: | material should be "cheesy" at the vent |
