 |
|
| Processing Guide: | PE-LD - Low-density polyethylene |
|
|
| Extruder: | Single Screw Extruder with vacuum, grooved feeding section |
|
|
| Screw Design: |
Barrier Screw, 25-30 L/D Two mixing sections: dispersive-mixing spiral-shear element, rhomboid distributive-mixing section |
|
|
| Compression Ratio: | 3,5:1 |
|
|
| Cylinder Temperatures: |
170-200 C 338-392 F |
|
|
| Melt Temperature: |
180-210 C 356-410 F |
|
|
| Pre-Drying: |
No, 3 hours at 80 C (176 F) for regrind |
|
|
| Calibration: | |
|
|
| Miscellaneous: |
slip additivated PE-LD as blend partner gives 10-20% higher specific output Larger screw diameter : continuously two channels (improved conveying in feeding section) |
