 |
|
| Processing Guide: | PE-HD - High-density polyethylene |
|
|
| Extruder: | Single Screw Extruder with vacuum, grooved feeding section |
|
|
| Screw Design: |
Barrier Screw, 25-30 L/D Two mixing sections: dispersive-mixing spiral-shear element, rhomboid distributive-mixing section |
|
|
| Compression Ratio: | 3:1 |
|
|
| Cylinder Temperatures: |
: 180-205 C 356-401 F |
|
|
| Melt Temperature: |
180-205 C 356-401 F |
|
|
| Pre-Drying: |
No, 3 hours at 105-110 C (221-230 F) for regrind |
|
|
| Calibration: | |
|
|
| Miscellaneous: |
bimodal PE-HD needs motor with 10-15% higher torque and has higher melt pressure/melt temperature Larger screw diameter : continuously two channels (improved conveying in feeding section) |
